AUTONET TV

The Key Won't Turn! (Ignition Problems)

You've just arrived at the store shopping and you're ready to head home.  You put your key in the ignition and… oh, no! The ignition won't turn! What do you do now?

Don't panic.  There are some things you can do to get going again.  The first thing to do is see if you have a locking steering wheel, an anti-theft feature that was introduced around 1970.  Sometimes it sticks.  Move the steering wheel side to side while you try to turn the key and you might be able to get it to release. 

Another thing to check is to see if your vehicle is in gear.  Most vehicles will only allow you to start the ignition if it's in park or neutral.  If you have an automatic transmission vehicle and it is in park, try jiggling the shift lever and try the key again.  Sometimes the safety mechanism doesn't properly make contact or gets a little sloppy. 

If both of these don't work, it could be your vehicle's battery is dead.  Some newer electronic systems require power so the key can turn. Others have alarm systems that detect if doors are open. 

Other issues that can cause key problems include something jammed in the lock cylinder.  Or some of the springs or pins inside may be stuck.  Consider that it may be the key itself.  Sometimes they get bent or simply wear out from the number of times they've been put in and taken out of the cylinder.

No matter what the cause, the first time this happens you should have your repair service facility check it out. That’s because if it happens once, it can happen again.  Even if you were able to get going again on your own, your ignition/key has warned you that something's wrong.  Have it checked out by a pro so you’re not locked into a bad situation.

Long Hill Auto Service
1905 Long Hill Rd
Millington, NJ 07946
(908) 647-7984
http://www.longhillautonj.com

Don't Be Shocked (Shock Absorbers)

If you've ever ridden down a rough road on your bicycle, you know how hard a ride it can be.  Yet drive down the same road in your car, truck or SUV and it miraculously will smooth out the ride.  That's because it is equipped with shock absorbers.  They are built to dampen impacts from road irregularities.  But after taking hundreds of hits from potholes, railroad tracks and curbs, your shock absorbers can wear out.  Besides the rough ride that can cause, there are other ways your vehicle's performance can be affected.

When it comes to braking for example, you may take a longer distance to stop.  That's because shocks help keep your tires in contact with the surface of the road.  If the shocks aren't working properly, the tires won't make contact like they should.  So when you slam on the brakes, your vehicle will take longer to stop.

Consider what worn out shocks are doing to your tires.  Since the bumps aren't being dampened as much, your tires can bounce up and down more.  That can produce a problem of uneven wear called cupping.

And when you start out from a stop, your vehicle may not have the traction it should since the shocks aren't keeping them down on the road as you accelerate.  If you have front wheel drive, you may lose some steering control on acceleration. Obviously, many of these things involve safety concerns.

Pay attention to any deterioration in your vehicle's ride quality.  If your vehicle is starting to bounce up and down and its ride feels bumpier than before, head on over to your vehicle service facility and get your suspension checked out.  Do the same if steering response isn't as good as it used to be.  Notice that your vehicle nose dives when you brake?  Are your tires wearing in an unusual manner? All are signs that your shocks may be on their last legs.

If the last time you replaced your shocks was 50,000 miles/80,000 kilometers ago, a technician should evaluate them.  Don't be "shocked" if it's time for new ones.

Long Hill Auto Service
1905 Long Hill Rd
Millington, NJ 07946
(908) 647-7984
http://www.longhillautonj.com

In the Hot Seat (Repair and Maintenance of Seat Heaters)

It's chilly outside. You flip on that switch that looks like a picture of a seat with little heat waves rising from it.  You expect soon you'll feel that warmth but… wait! It's not getting warmer.  Oh no, what's wrong with my seat heater? There could be lots of reasons it's not working, and it could be as simple as a fuse or as major as the heating element itself.  But it's something to leave to a pro to diagnose and repair.

Let's say it turns out to be a blown fuse.  Simply replacing the fuse may not fix it because there was a reason the fuse blew in the first place.  It's possible the on-off switch has worn out or corroded.  Perhaps the wiring connection isn't completing the circuit (could be corroded or full of dirt) or the voltage reaching the heating element isn't correct. 

There's a little sensor that keeps track of the seat heater's temperature called the thermistor.  When the seat is hot enough, it will stop the juice from heating it any more.  Sometimes those fail.  But if all of these components are healthy, you may need a new heater element. 

Those seat-heating elements are made up of wires that get sat on.  A lot.  That can put significant strain on them.  Putting something heavy on the seat can break them. Or, if you put your knees on the seat cushion as you're getting something in a rear seat, that can also damage the element.  Sometimes they can be repaired but often they have to be replaced.  And here is where the technician's expertise comes into play.  That heater element is attached to the seat's fabric and replacing it can be tricky.  It also can require disassembling a lot of the seat to access it. 

Seat heaters are a wonderful feature and they make your vehicle oh, so much cozier.  So keep them working and enjoy the warmth!

Long Hill Auto Service
1905 Long Hill Rd
Millington, NJ 07946
(908) 647-7984
http://www.longhillautonj.com

Getting the Right Tires and Wheels in Millington

A lot of people get custom wheels in Millington. When you do this yourself (over the internet . . .) you could run into trouble if you're not careful. Sometimes, once they're mounted, they just don't fit right. The tires rub in turns or on bumps. You don't want that.

Consulting your Long Hill Auto Service tire professional can ensure you get the right fit. First he'll ask you a series of questions about your Millington driving needs and what you want in your new wheels. Now, not every wheel can go on every car. Care must be taken so that tires and wheels are not too large or that the wheel is centered too far towards the outside or the inside so the tires rub.

If you don't want to make any modifications to your vehicle, you would need to focus on the wheels that would fit. With trucks, some people in Millington like much bigger tires so they need a suspension lift.

Also, most Millington drivers don't realize that you need to keep the rolling diameter of your new tires – the overall height of the tire – very close to what came from the factory in order for your vehicle's anti-lock brakes and stability control systems to work properly.

The computers that control these systems are calibrated to a certain size tire. When you go bigger or smaller, the computer doesn't know what changes you made so it can't tell how fast you're going. This, of course, means it sends commands to the brakes and traction control that are based on the wrong speed. If you go with a different rolling diameter, your vehicle engine control computer can be reprogrammed for the new tire size.

Either way, there are hundreds of wheel and tire choices to choose from in NJ. You can pick the style of wheel you want and then talk with your friendly and knowledgeable Long Hill Auto Service tire professional about how big the wheel should be – and how to select the right tire for your vehicle. Your Long Hill Auto Service service advisor will help you find the best tire to meet your style, performance, ride and handling needs in Millington.

Long Hill Auto Service
1905 Long Hill Rd
Millington, NJ 07946
(908) 647-7984
http://www.longhillautonj.com