AUTONET TV

Out of Joint (CV Joint and Boot Replacement)

If you have a front-wheel-drive vehicle, it has components called CV joints which enable you to turn your wheels smoothly. The CV stands for “constant velocity.” In essence, it’s a set of gears that connect a shaft that allows power from the transmission to be sent to the wheels.  When you turn the wheels, no matter what angle, the input velocity rotation will be equal to the output. Thus, the name, CV (constant velocity) joint. Other vehicles with 4-wheel drive and all-wheel drive also use CV joints.  

If one of your CV joints isn’t working right, you may find your vehicle difficult to handle.  If one breaks, your vehicle may stop moving.  So, it’s important that CV joints be in top working condition.  The joints need a lot of lubrication, so they are surrounded by grease.  There’s a rubber enclosure around them called the boot which holds the grease in and protects CV joints from the elements. 
 
The biggest problems come when one of those rubber boots cracks.  Water and dirt can then get into the joint, causing it to wear down and lose all its vital lubrication.  It’s important to have your CV joints inspected regularly so a technician can spot cracks before the CV joints are ruined.  Sometimes just the boot can be replaced before any major damage is done.  But when the joint does go bad, it must be replaced.  

Signs your CV joint needs changing out? You might hear a clicking sound when you turn if the CV joint is worn out. You might notice some thick, black grease around your wheel or on the pavement where you park your vehicle.  You might also feel your vehicle vibrate when you’re going fast.

If you suspect you might have a bad CV joint, bring your vehicle in so a technician can determine what’s going on.  Keep your CV joints in good shape and reduce the risk of them seizing up at an inopportune time so you can avoid being stranded.

Long Hill Auto Service
1905 Long Hill Rd
Millington, NJ 07946
(908) 647-7984
http://www.longhillautonj.com

Snake in the Engine (Serpentine Belt)

There's a belt that snakes through your engine.  It's even named for a snake, the serpentine belt.  It'll bite you when it breaks, possibly leaving you stranded.  So, it's good to know a little about this snake-like belt.

In early engines, there were lots of belts. They were used to convert the rotating power of the engine to turn a mechanical part.  But engineers had an idea.  Why not consolidate all those belts into one that ran a bunch of different parts simultaneously? Voila!  The serpentine belt.

It's found in the front or side of your engine unlike older belts which were often in a V shape, the serpentine belt has ribs on it which more effectively connect with the pulleys that power the other components.  A serpentine belt may power the water pump, power steering pump, alternator, and the air conditioning: all from one crankshaft. 

Now, all that's fine when everything is working well and the belt is intact.  But when a serpentine belt wears, gets loose, or breaks, it can affect many engine components at once.  Not an ideal situation. 

If you hear squeals coming from the engine compartment, see a battery light, or the engine overheats, those could be signs that your serpentine belt needs replacing.

The good news is that they usually last a long time, from 60,000-100,000 miles or 100,000-160,000 km.  Still, they don't last forever, and your vehicle's manufacturer usually recommends replacing them when they've gone close to the expected maximum.  It’s also recommended that you replace the pulleys and belt tensioner at the same time as they have the same service life. Regular maintenance and inspection of the serpentine belt is not only a good idea; it’s one of those things that you should not let "slip" by.

Long Hill Auto Service
1905 Long Hill Rd
Millington, NJ 07946
(908) 647-7984
http://www.longhillautonj.com

Getting from E to F (Fuel Gauge Problems)

Who thinks about their fuel gauge?  You probably don't… until it doesn't work any more.  Then you have to guess how much fuel is in your tank, and that's no way to live life on the road. 

Fuel gauges, like every other part in your vehicle, can fail.  And when yours stops working, you will probably want to head over to your service facility soon, because no one relishes running out of fuel.

The fuel gauge system is much more than just the gauge you can see on your instrument panel. Most systems have a float inside the fuel tank that goes up and down depending on the fuel level.  It's called the fuel sending unit, and it sends an electrical signal to the gauge (on the dash) telling it to display how much fuel is left in the tank. 

So, what could go wrong?  Well, a few things.  For one thing, corrosion from bad fuel can cause it to stick and it won't move up and down any more.  So you could fill up your tank and the gauge would still read Empty.  If a sending unit needs to be replaced, often the parts can be costly. The good news is that fuel sending units rarely fail and most drivers will never have one go bad.

Other things that can go wrong? An electrical problem could cause a fuse to blow and you won't get a reading at all.  A technician can figure out where that electrical problem is and how to repair it.  Finally, it's possible for the gauge itself (on the instrument panel) to fail.

One thing to keep in mind is if your fuel gauge isn't working, you might be tempted to carry around an extra container of fuel.  That's ok if it's outside the cabin, such as in the bed of a pickup.  But if you carry it inside the cabin or trunk, fuel fumes can be very dangerous for your health, even fatal.

A working fuel gauge gives you peace of mind… so you'll never have that "empty" feeling.

Long Hill Auto Service
1905 Long Hill Rd
Millington, NJ 07946
(908) 647-7984
http://www.longhillautonj.com

Your Vehicle is Talking to YOU (Service Warning Signs)

Your vehicle may be like that famous battery bunny, the one that just keeps going and going.  But while it may seem sometimes like you never need to take your vehicle in to be worked on, there are some things you should keep your eyes, ears and nose out for. They are warning you about something that needs attention at your vehicle service facility.

• If a warning light is on, don't ignore it; do something about it.  There are warning lights for battery, oil, engine heat, tire pressure… you name it.  And the manufacturer put them there for a reason.  They're telling you something isn't normal. So when one goes on, have it checked out soon, especially the blinking Check Engine light.  The earlier you have any warning light issue diagnosed, the more likely you are to avoid a more serious problem.
• If your vehicle is vibrating or shaking, it's not only annoying, it could signal trouble.  You can bet your vehicle didn't do that when it came out of the factory! If you can feel a vibration in the seat of your pants or shaking in the steering wheel, head on over to your service facility and have them diagnose what is causing it.
• Smoke coming out of anywhere in your vehicle is a signal (smoke signal, get it?) that there may be a troubling issue.  Likewise if you can smell something burning (like oil), the nose knows there's something amiss.  Time to find out what.
• If you aren't getting the distance you used to out of a tank of gas, it may not simply be your lead foot. A lot of vehicles will give you a digital readout of your latest mileage.  If your fuel economy takes a dip, take a trip over to your service facility.  You might have a sticky brake caliper… or it might be something as simple as your tires need more air.
• Yes, you know the dreaded puddle of something under your vehicle can be a bad sign.  It could smell sweet, it could feel oily.  But it means something is leaking.  Go get it checked.  Sooner is better when it comes to locating the source of a leak.
• If your brake pedal travels further than it used to while stopping, that could be compromising your ability to stop safely.  Also, if the brakes are making odd sounds, pulsating, grinding or squealing, they're screaming at you for attention.  Proper braking is a must for your safety and those drivers around you.

An old 80s TV show called "Knight Rider" featured a talking car.  You already have a vehicle that's telling you things all the time.  Give it a listen and it will keep you going safely down the road for many years to come.

Long Hill Auto Service
1905 Long Hill Rd
Millington, NJ 07946
(908) 647-7984
http://www.longhillautonj.com

The New Blade in Town

If your windshield wipers are streaking and chattering when you turn them on in the rain or snow, it's time for a little "blade renewal." And when it comes to new wiper blades, there are some new designs that are worth a look.

One of the latest is called the beam blade.  It's different than conventional blades you might be used to.  Instead of a metal frame and a rubber blade that slides in the frame on a track, the beam blades have an enclosed spring-steel band that allows the rubber wiper to conform to the windshield glass shape much more tightly. 

There are some key advantages to beam blades, which is why many vehicle manufacturers are making them standard on their latest models.  For one thing, they work well in all weather conditions, including the heat of summer and the icy, snowy cold of winter.  Since there is no separate frame, snow and ice can't form in gaps like conventional wipers and prevent the blade from clearing your windshield. 

Many beam blades also have a mini "wing" on them. It uses the air moving over your windshield to create a little extra downward pressure that presses the blade even more tightly against the glass.  The faster you go, the more firmly the blade can sweep off moisture. That means a clearer view. 

Beam blades are an upgrade that can add to your vehicle's overall safety with that increased visibility.  The best thing is to discuss wiper blades with your service advisor to see if it's a good choice for you and your vehicle, keeping in mind the type of driving you do and the climate you live in.  Remember that when it comes to wipers, it's important that you are using blades that are designed to fit your vehicle and that they are installed correctly. 

Long Hill Auto Service
1905 Long Hill Rd
Millington, NJ 07946
(908) 647-7984
http://www.longhillautonj.com