AUTONET TV

Oh, Stop! (Disc Brake Service)

Every time you drive your vehicle, you wear down your brakes just a little bit.  And after a while, that adds up.  Gradually, your stopping power isn't like it used to be.  Since brakes are one of your vehicle's most important safety features, it just makes sense to keep them performing well.

Most vehicles have disc brakes.  One key component, as the name suggests, is the disc.  Most vehicles have discs on their front and rear wheels.  The discs (also called rotors) are made of metal, and each rotates with the wheel hub.  Your brakes also have pads that make contact with the rotors when you press down on the brake pedal, and the friction stops your vehicle.

After many, many stops, that friction wears down both the pads and the discs and reduces their ability to stop the way you need them to.  The discs may also become uneven from all the heat they generate, and your brakes won't stop as well as they used to when they were newer. 

Some signs that your rotors need attention include vibration at the wheels when you stop, discolored rotors (the metal looks blue), excessively hot rotors, or grooves in the metal.  If you see any of these signs, it's time to bring in your vehicle for us to inspect your brakes. 

A technician will measure the thickness and trueness of the rotors and check the surfaces for wear.  If they need to be replaced, they'll be done in pairs, so if a front rotor is bad, the other front rotor will also be replaced. Usually, your brake pads will be replaced at the same time.  You can ask your service advisor if higher-performance brakes would benefit you.

When your vehicle is at the shop, the technician will check other components of your brake system to make sure they are operating safely. Brakes are vital to the safe operation of your vehicle.  Keep them well maintained so they can be there when you need them.

Long Hill Auto Service
1905 Long Hill Rd
Millington, NJ 07946
(908) 647-7984
http://www.longhillautonj.com

The Little Valve that Could (PCV Valve Replacement)

It's easy to get letters like PVC and PCV mixed up.  PVC is a plastic that's used in a lot of things, especially plumbing pipes.  And PCV is a valve that helps your engine burn off excess fumes rather than having them pollute our atmosphere. 

PCV stands for positive crankcase ventilation.  When your engine ignites gasoline in the cylinders, some of the gases produced make their way into the crankcase, where oil is held to lubricate the engine.  In earlier days, those gases would be vented out through a hose and go directly into the air.  It was a waste of gasoline (since about three-fourths of the gases were unburned fuel) and a nasty source of pollution.

So engineers devised a one-way valve that directed those gases back into the engine's air intake system to be burned again.  After a while, the PCV valve can get clogged up with gummy oil.  Not only does that reduce the recirculation of the gases, but it can also cause pressure in the crankcase to increase and possibly lead to an oil leak.

Signs your PCV valve has failed are oil leaks around the engine compartment or under your vehicle and poor engine performance. Your fuel economy will get worse. If you notice those signs, we can check your PCV valve. 

At the same time a technician inspects the PCV valve, they'll also check the vacuum hose that runs back to the air intake.  Plus, they'll make sure the vehicle doesn't have any other engine problems that might be contributing to your issues. 

Many technicians recommend replacing your PCV valve with each major tune-up, so you get ahead of any problems before they develop.  Now that you're an expert on PCV, it may be time to check out those PVC pipes in your bathroom!

Long Hill Auto Service
1905 Long Hill Rd
Millington, NJ 07946
(908) 647-7984
http://www.longhillautonj.com

Long Hill Auto Service Advice on What to Pour into Your Vehicle

Changes in vehicle design and manufacture have resulted in changed fluid requirements for our vehicles. With the sophistication of engines, transmissions, differentials, etc., it's best for Millington residents to always use the proper type of fluid for their vehicle. Using incorrect fluids can actually damage your engine.

As engines have become more sophisticated, new weights (or grades) of engine oil have been introduced. Today, there is a much wider range of weights for engine oil as well as a variety of formulations for different types of engines.

Transmission fluid, brake fluid and coolant/anti-freeze have changed because the materials that go into making the systems they protect have changed. The fluids in our vehicles generally have two jobs: to lubricate and to prevent corrosion. The fluids formulated for your vehicle are specifically designed to protect the materials that make up its engine parts. Using the wrong fluid may leave some parts vulnerable to corrosion. Further, using the wrong fluids can also void your vehicle's warranty. So Long Hill Auto Service recommends Millington drivers follow the fluid recommendations in their owner's manuals.

Vehicle fluids, including engine oil, are also designed in special formulas for higher mileage vehicles. These formulas contain additives that help clean older engines and transmissions as well as recondition older seals and gaskets. These fluids are perfectly okay for your vehicle as long as you match the original fluid recommendations in your owner's manual. In other words, a high-mileage oil is fine as long as it is the same weight as the oil recommended by your vehicle's manufacturer.

Good vehicle care always includes proper attention to your vehicle's fluids. Understanding and using correct fluids will keep your vehicle running well and will help prevent early corrosion and wear of vital engine parts.

Talk to your Long Hill Auto Service service advisor for more information.

Long Hill Auto Service
1905 Long Hill Rd
Millington, NJ 07946
(908) 647-7984
http://www.longhillautonj.com

Why is Air Not Coming Out of My Vents?

You climb inside your vehicle, start the ignition, and reach for the fan control for the heating or air conditioning.  But when you try to crank it up, no air comes out of the vents. It can make for a very uncomfortable trip, whether it’s hot or cold outside.

It’s important for the comfort of you and your passengers to regulate the temperature in your vehicle’s cabin.  Not having air coming through the vents can also be a safety issue when you’re trying to defrost the windshield and front windows when they fog up and your visibility is affected.  

There can be many reasons why the air isn’t blowing through your vents.  The blower motor may have failed or the switch that controls it wore out.  It could be as simple as a blown fuse, or perhaps an electrical component that regulates the fan speed may have stopped working. One of the ducts that direct the air from the outside to the cabin may have broken.  Or the air intake where the outside air is collected may be clogged up with leaves or other debris.

If your vents aren’t blowing air, it’s time to bring in your vehicle to have one of our technicians diagnose and repair it.  They will examine the electrical and mechanical components to see where the problem is.  The remedy can be something simple, or it may involve a more extensive repair.  

Keeping the cabin temperature temperate and having good air flow are vital to your comfort, especially when the weather outside is extremely hot or cold. 

Long Hill Auto Service
1905 Long Hill Rd
Millington, NJ 07946
(908) 647-7984
http://www.longhillautonj.com