AUTONET TV

Why Maintaining Your Windshield Wipers and Washers Matters (Windshield Wiper and Washer Inspection)

What do mud, bird droppings and frost all have in common? When they’re covering your windshield, they can temporarily obscure your view of the road, leaving you driving blind.  And when you can’t see the road clearly ahead of you, it can be really scary. 

That’s one of the reasons it’s important to maintain your windshield cleaning system, which includes your wipers, blades and washers.  They’re three vital components that work together to ensure you’re clearly seeing what’s going on with the road and drivers around you.

Your wipers are doing the physical work on the surface of your windshield’s glass.  The rubber or silicone is what touches the surface of the glass, and after time and exposure to the elements, wiper blades can get brittle, lose their flexibility, rip and tear to the point where they simply can’t clear the glass.  

What holds the wiper blades close to the glass is important, too.  Conventional blades use a metal frame which holds flexible rubber inserts.  Just the inserts can be changed which keeps replacement costs down.

Another type that’s gaining more popularity is called a beam blade.  It doesn’t have a frame but instead has a stiff beam and blade combination.  Beam blades can conform more snugly to the curved glass used in many recent vehicle designs.  Plus they have a sweeping shape which harnesses the pressure of the air that passes over them to apply more pressure during wiping, especially effective at highway speeds. High-tech rubber wiper blades, what …?! Seriously, they are pretty cool.

If you crossed the conventional frame blade with a beam blade, you’d have the hybrid wiper.  It’s constructed like a traditional wiper with a plastic frame that takes advantage of the aerodynamic shape of a beam blade.

Equally important to your windshield is the washer system since wiper blades simply don’t work on dry glass.  The washers use a pump to shoot fluid on your glass to remove debris, dust and other contaminants. 

All these systems need to always be at the ready since we never know what elements we’ll encounter on the road. Regular inspections and maintenance of your wipers and washers can ensure you’ll be able to see far down the road ahead of you for clearer vision and safer traveling.

Long Hill Auto Service
1905 Long Hill Rd
Millington, NJ 07946
(908) 647-7984
www.longhillautonj.com

Why is My Brake Pedal Hard to Push?

When you push on your brake pedal, you should find your vehicle easy to stop.  But at some point, you might notice stopping takes much more pressure on the pedal than it used to.  When it gets to that point it becomes a safety issue, and you should bring your vehicle in so we can track down what’s not working correctly.

Brake pedals that are stiff mean there’s something wrong with one or more components of your entire brake system.  For example, it could be moisture has contaminated your brake fluid, making it harder to push the pedal down.

Many vehicles use hydraulics to amplify your pedal pressure to a force strong enough to stop your vehicle.  Certain problems can develop with your hydraulics, such as a faulty master cylinder, a kink in one of your brake lines, or a failed proportioning valve which regulates pressure to your rear brakes. Vacuum leaks can also make your brake pedal hard to push. Another cause could be a problem with your vehicle’s brake booster or its check valve.

Because your vehicle’s braking system is made up of many different components, one of our technicians will look at several different possible causes in yours.  Your vehicle may not have enough brake fluid in it, so they’ll check the level.  A visual inspection of your hoses, brake lines and vacuum line to the brake booster may turn up the root cause of your issues.   

Because there are many different causes of a hard-to-push brake pedal, solutions may involve one or more different steps.  Keep in mind this is one problem that needs to be fixed for you to drive safely.  That’s why it’s important to have a professional track down the issue, or issues, and take care of the problem(s) so you can be back on the road, safely going and stopping.

Long Hill Auto Service
1905 Long Hill Rd
Millington, NJ 07946
(908) 647-7984
www.longhillautonj.com

Air Conditioning Maintenance at Long Hill Auto Service in Millington

Warm weather or cold, Millington drivers still need to think about their vehicle's air conditioning. Most Millington people don't service their air conditioning until after it fails. At Long Hill Auto Service, we can advise you on your vehicle manufacturers preventive maintenance schedules for air conditioning service, just as we do for transmission service, oil changes and so on.

Maintaining your air conditioning system means that you always have enough refrigerant to properly do the job. Small leaks in the vehicle's air conditioning system allow the refrigerant to escape and the system can't cool the air as well. We see that a lot at Long Hill Auto Service in Millington.

The refrigerant also contains oil that lubricates air conditioning components and keeps the seals resilient. Low refrigerant and lubricating oil means that the air conditioning parts will wear out prematurely, and all Millington vehicle owners know that air conditioning repairs can be costly. At Long Hill Auto Service, we recommended that the air conditioner be run regularly, even during winter months, to keep the parts and seals lubricated.

Millington drivers need to be aware that there's one more thing that isn't directly related to air conditioning service but does impact the quality of the air in your vehicle. And that's your cabin air filter. This filter cleans dust, pollen, pollution and other impurities in the air that come from the heater and air conditioner. The cabin air filter needs to be replaced when it's dirty. If you don't, it'll start to smell. Not all vehicles have one, so ask your Long Hill Auto Service service advisor to check your cabin air filter at the same time they're doing your air conditioning service.

Long Hill Auto Service
1905 Long Hill Rd
Millington, NJ 07946
(908) 647-7984
www.longhillautonj.com

Don’t Blow Your Cool (Water Pump Replacement)

It’s always a good idea to keep your cool, and that’s especially true when it comes to some components of your vehicle.  One is the engine.  It’s hot under that hood thanks to the mini explosions that are occurring in the internal combustion engine when it’s running.  Your vehicle has a cooling system which takes the heat out of the engine by moving a liquid coolant to a spot where the heat can escape (the radiator). 

The part that keeps that coolant moving is the water pump, which could probably be more accurately called the coolant pump since water is only one component of the fluid that does the cooling. If the water pump fails, your engine can overheat quickly, and that can cause significant and expensive damage to your vehicle.  Water pumps can be driven by belts (mechanical) or electricity (electric).

Your vehicle’s manufacturer recommends mileage intervals when you should consider replacing your water pump even if seems to be working fine.  That way   you are less likely to have a water pump break down at an inopportune time. Some manufacturers recommend replacing it every 60,000-100,000 miles/100,000-160,000 km.

Sometimes your water pump will fail before that, of course.  One sign something is wrong with the cooling system is if you notice the engine is overheating.  An illuminated engine temperature warning light on your dash or a temperature gauge that shows above normal are two things to look for.

You may also see steam coming out of the engine compartment, which is another sign of overheating.  Both could mean your water pump needs replacing.  We also recommend that when your vehicle’s timing belt needs to be replaced that you have the water pump replaced at the same time since everything will already be apart.

When your vehicle is already in to have the water pump replaced, it’s a good time for a technician to examine other cooling system components at the same time.  Those will include belts, pulleys, hoses, clamps as well as the radiator, thermostat and heater core.